Apache 24-1H
Report #2
Daily costs
Select rows and press Ctrl+C. Ctrl+V pastes them onto the cost table of another report. A contingency account fills its amount from its percent of the other lines.
Total $24,285.50
3 rows
Activity
Enter a start time, then an end time or the hours. The other one fills in. Total 24.00 hrs.
4 rows
Drilling parameters
This report only. Spot checks while on bottom. WOB in klb, torque in kft-lb, ROP in ft/hr, flow in gpm, standpipe pressure in psi. Select rows, Ctrl+C, then Ctrl+V on another report.
1 row
Drill string
Copied onto the next report. Depth is feet. Weights are klb. Torque is kft-lb. Select rows, Ctrl+C, then Ctrl+V on another report.
0 rows
Mud properties
This report only. One row per mud check. Weight is ppg, funnel viscosity is seconds, gels are 10-second and 10-minute. Select rows, Ctrl+C, then Ctrl+V on another report.
1 row
Mud materials
Copied from the previous report, including on-hand. Received and used are for this day only. Select rows, Ctrl+C, then Ctrl+V on another report.
1 row
Diesel
Ending volume is the start, minus what was used, plus what was delivered. A new report starts each line from that line's previous ending volume.
| Start volume | Used | Delivered | Ending volume | |
|---|---|---|---|---|
| Diesel for Rig | ||||
| Diesel for Mud |
Bit runs
Hours are rotate and slide time while the bit is in the hole. ROP is footage divided by those hours. Dull grading is I, O, D, L, B, O, G. Select rows, Ctrl+C, then Ctrl+V on another report.
2 rows
BHA
Copied from the previous report. The BHA # stays with the assembly and is shown in the well summary. Change it when the tools change. When the component is Bit, Pick copies a bit's size, make, type, jets, and serial into this row. It is a copy, not a link. Select rows, Ctrl+C, then Ctrl+V on another report.
3 rows
Surveys
Shown on every later report. A station added today stays on the following days. Changing one here changes it on the other days. Select rows, Ctrl+C, then Ctrl+V on another report.
1 row
Casing
Shown on every later report. Changing or removing a string here changes it on the other days. Shoe MD is where the casing is set. Select rows, Ctrl+C, then Ctrl+V on another report.
1 row
Cement
Shown on every later report. Changing or removing a job here changes it on the other days. Sacks times yield fills CuFt. Barrels are CuFt divided by 5.6146. Select rows, Ctrl+C, then Ctrl+V on another report.
1 row
Pump hydraulics
Copied from the previous report. Change liner, rate, and strokes if they are different today. Select rows, Ctrl+C, then Ctrl+V on another report.
1 row
Contacts
Copied from the previous report. Change who is on location today. Select rows, Ctrl+C, then Ctrl+V on another report.
2 rows